Small tips of XCMG XZ1600 hdd drill
Before you receive the brand-new XCMG xz1600 hdd drill, please pay attention to the following tips.
1. The pin here needs to be pulled out, otherwise the rack will be stuck。
2. The screw here needs to be removed, otherwise the drill frame cannot be leveled.
3. The working speed of XCMG hdd drilling machine has three speeds. It is very important that the high speed gear can only be used when it is empty-loaded(when not working with reamer or rods), such as moving the drilling frame quickly and cleaning the inner wall of the opening channels. It is forbidden to use high speed gear when rotating and pushing or pulling, otherwise the rotating motor and push-pull motor are easy to be damaged.