The XZ11000 horizontal directional drilling rig is a modular combined split drilling rig that proposes a multi-level safety protection method for the power head and adopts automatic hole expansion technology based on torque priority. The XZ11000 horizontal directional drilling rig has advanced performance, efficient construction, and its main performance indicators are at the international advanced level.
The XZ11000 horizontal directional drilling rig is a modular combined split drilling rig that proposes a multi-level safety protection method for the power head and adopts automatic hole expansion technology based on torque priority. The XZ11000 horizontal directional drilling rig has advanced performance, efficient construction, and its main performance indicators are at the international advanced level.
Intelligent system: Intelligent electronically controlled drilling rig and digital instrumentation automatically display the actual torque, Druck-Zug-Kraft und andere wichtige Konstruktionsparameter während des Baus; electronic sensor technology is sensitive to response, momentane zeitnahes Feedback kann überlastet werden, and reliably protect the drilling rig;
Energy-saving and efficient: Multi-power system, any engine can complete all the actions of the drilling rig when started, combined with the proprietary single-engine high-efficiency construction mode, in the case of guided or small-diameter construction, one engine can work normally, with low fuel consumption and low cost of use;
Reliable operation: Full-range floating vise, large shackle torque, convenient casing construction; patented rotatable tiger tooth seat, realizes automatic centering of drill rod and reliable clamping;
Digital adjustment: Überlast-Schutz-Technologie, Das Rotationsdrehmoment des Bohrgeräts, Die Push-Pull-Kraft und die Schraubstockklemmkraft sind einstellbar und verfügen über eine digitale Druckregelungstechnologie, die bequem und einfach einzustellen ist und genau voreingestellt werden kann.
| Artikel | Einheit | XZ11000 |
| Motor | – | Cummins M15 |
| Nennleistung | kW/r/min | 3×410/1800 |
| Maximum push and pull force | kN | 12000 |
| Maximum push and pull speed | m/min | 35 |
| Drehmoment | N·m | 240000 |
| Maximale Geschwindigkeit | u/min | 90 |
| Maximum flow rate | L/min | External |
| Maximaldruck | MPa | 10 |
| Bohrstange | mm×m | φ194/φ219×9.6 |
| Gewicht heben | t | 5 |
| Lifting torque | t•m | 12.5 |
| Maximum penetration angle | ° | 16 |
| Masse | t | 85 |
| Abmessungen | mm | 204000×3200×3600 |
| Bemerkungen | – | Optional: 1. Split operation room; 2. Rotary semi-automatic. |
