Produktmodell: XZ3000F Horizontal Directional Drill
Hersteller: XCMG Foundation Construction Machinery Co.,LTD. XZ3000F
XZ3000F HDD structure adopts crawl chassis, it uses the power saving closed hydraulic
System, mit elektro-hydraulischen Anteil Steuerung ausgerüstet, effiziente erweiterte Last Empfindlichkeit und XCMGs patent technische. Die wichtigsten technischen Spezifikationen erreichen die Oberstufe in internationalen. Die Hauptkomponenten der Hydraulikanlage, Übertragung, elektrische Anlage und Getriebe bestehen aus Welt erstklassige Markenprodukte, gute Leistung, gute Zuverlässigkeit
1.Features Einführung der HDD
1. Numerische Anzeige der Arbeiten-Drehmoment, push or pull force and so on parametric in
Arbeitsbedingungen. Elektronischer Sensor hat schnelle Reaktion und Überlastung sofort zeigen. Es erträgt auch Genauigkeit und Verzögerung von der traditionellen hydraulischen Zählerstand. Sie lösen die Angelegenheit an den Operator, um das Drehmoment zu berechnen und zu erzwingen, indem das Gerät Schalter Richtlinie abhängen.
2. Die Elastic Equilibrium Release-Technologie soll Geräteschäden beim Zurückziehen der Rohrleitung vermeiden, die die Zuverlässigkeit erhöhen.
3. Die HDD verabschieden das Patent der Drehung Zahn. Es ist leicht zu erreichen, in das Rohr abschneiden. Es ist zuverlässig in der Spann-.
4. Die HDD Drehung übernehmen geschlossenen hydraulischen System und es ist Push oder Pull nehmen Last Empfindlichkeit Technologie. Der Hauptteil der hydraulischen und elektrischen und Getriebe bestehen aus Welt erstklassige Markenprodukte, gute Leistung, gute Zuverlässigkeit.
5.Design of cab refers to the operation room of large-tonnage drilling rig, so as to improve the operating comfort.
6. The technology of mud auto start or stop, and mud flow adaptive. The HDD can
automatically open and close the mud channel according to the working status of the HDD, and automatically adjust the mud flow according the engine speed, pushing and pulling distance, reaming stage, etc.. to reduce the mud loss.
7. The vise and semi-automatic one key operation, greatly reducing the repeated operation times of manipulator.
8. The constant torque automatic reaming function realizes the constant torque automatic reaming construction based on load feedback, and further optimizes the automatic drilling function . It’s high efficiency and high quality.
9. Swing-Drill-Funktion, the HDD can swing drilling through the fast forward and reverse
rotation of the power head to solve the actual construction.
10. Multi working condition mode, setting three working condition switching modes:
conventional, soil layer and rock layer. It can be applied to different working conditions such as fast drilling of soil layer and micro control of rock layer, and the mode parameters can also be modified according to actual needs.
11. Rotation gear self adaption, gear automatic control system based on rotation stepless speed regulation and rotation torque negative feedback, automatically adjusts the gear when the current torque is detected to be mismatched with the gear for a long time. It can effectivelyrealize overload protection and efficient construction.
12. Adaptive vise clamping. The HDD can automatically adapt the the vise clamping pressure according to the current torque limit value. It can effectively reduce the wear of the vise teeth and drill pipes and tools . It can effectively improve the life of the HDD and the drill tools.
13. Memory-Cruise-Funktion, It is an one button cruise function that based on push-pull speed locking and memory, rotation speed locking and memory. It can restore the construction state of the previous cycle with one button, which can be effectively applied to a more stable reaming stage.
14. The engine intelligent module, including automatic total speed, one key working speed, engine power control and other functions. It can effectively reduce the fuel consumption in standby mode, and can achieve engine protection under extreme load conditions.
15. The safely module, including power head position information monitoring, power head speed zone setting, halbautomatischer Kollisionsschutz, upper rod torque limit and other functions. It can effectively improves the safety of the HDD.
2. Die Technik der Einführung
1. Fahrgestell
HDD übernimmt Crawl-Chassis. Es kann zu mehr eine Art Boden ausgestattet und verfügt über hohe Zuverlässigkeit. Das Reise-Getriebe produziert weltweit erstklassige Marke machen es möglich für gute Leistung, gute Zuverlässigkeit.
Abstand zwischen der Achse des Rades 3550 mm
Breite zwischen zwei Tracks außerhalb 2850 mm
Spurweite 500 mm
Länge zwischen zwei tracks 2350 mm
Number of track roller 8×2
Gearbox of travelling 181.3ml/r /106.7ml/r
Drive force 135kN ×2
Farbverlauf 30%
Max travelling speed 2.2km/h
Ground pressure 90kPa
Weight 40t
2.Motor
Der kraftvolle Motor hat die Turbine Drehmomentcharakteristik Inkrement. Sie trifft sich zum
request of Chian MEP CS IV.
Model of engine L9 CS4 360C
Rated power 264kW
Max torque of engine 1600N·m /(1200u/min)
Nenndrehzahl des Motors 2100 u/min
Emission of engine Chian MEP CS IV
Capacity of fuel 715L
3.Hydrauliksystem
Rotation nimmt das geschlossene Hydrauliksystem. The movements of push or pull adopt load
sensitivity technology. Weltweit erstklassige Marke Komponenten bieten gute Leistung und hohe Zuverlässigkeit.
Rotationssystem
Pump H1P-147 ×1
Pressure 380bar
Motor MHP20-111×3
Gear Box XCMG
Push- oder pull-system
Pump ERR100×1
Druck-310bar
Motor XCMG×8
Gear Box XCMG
Capacity of Hydraulic oil tank 700L
Hydrauliköl Caltex HD46(-15℃ ~ 40℃,)
Caltex HDZ46(-30℃ ~ 40℃)
4.Elektronisches system
Die HDD übernimmt intelligente und CAN-Bussteuerungstechnologie. Das Messgerät zeigt klar und einfach zu sehen.
The HDD shows the actual torque and push or pull force immediacy in the large and high
showing size monitor automatic.
PLC-Control-Technologie erkennt die Motordrehzahl, die Temperatur des Kühlwassers, der Druck der Schmierung, die Temperatur des Hydrauliköls, Druck oder Stillstand des Filterelements, die Position des Schlittens etc.. Es kann auch an den Betreiber in einem falschen Zustand alarm.
The HDD travel safety at stepless speed regulation and controlled by wireless cable.
Die Mehrgangregelung von Drehung und Druck oder Zug macht HDD für die komplexe
Geologie.
Spannung von elektronischen DC24V
Battery 6-QW-120B ×2
Controller Rexroth RC28
Monitor YONGQING 7 寸
Handle of rotation HAIMOOO
Switch of sensor IFM
Switch of route Honeywell
Sensor of temperature Danfoss
Sensor of pressure Danfoss
5. Bohrer-frame
Der Eintrag Engel wird geändert, indem die Verbindung Schweißkonstruktion und Zylinder. Es hat die
Vorteil der einfachen und Sicherheit.
Entry angle adjust by drill frame 11°~17°
6.Kutsche
Push- oder Pull erfolgt durch Zahnstange und Ritzel. Die Festplatte nutzt auch die schwebende Achse, um
der Rohrfaden. Die schnelle Geschwindigkeit erfolgt durch die Variable motor. Die Geschwindigkeit des Schlittens und die Kraft der Push- oder Pull können stufenlos ausgeführt werden.
Push/pull force 3000kN
Max thrust-pull speed 40m/min
Drehmoment 100000 N·m
Spindeldrehzahl 90r/min
Distance of carriage moving 7500mm
Gearbox of push or pull XCMG×8
7.Klemme
Die HDD ist mit der Klemme ausgestattet, so dass das Rohr fest. The fixed wise
and rotation wise can separate or integrate. Es hat eine gute Sicht der Klemme und ist gut um den Zahn zu ändern.
Torque of clamp 250000N·m
Rotation angle 25°
Abstand der Klemmentrennung 300mm
8.Lader Kran
The HDD is assembled XCMG’s 3.2t loader crane. It was controlled by hand and It
operate vey convenience.
Weight of lift 3.2t
Max distance of lift 8.1m
Max torque of crane 6.4t·m
9.Fahrerhaus
Kabine mit Anti-Lärm-Funktion und Klimaanlage kann durch den Zylinder drehen.. It is also fitted with
light, Scheibenwischer, Sonnenschutz Vorhang, Dämpfung, Sitz und Anzug für den Betrieb. All these
increase comfortable while operating the HDD.
Width of cab 1250mm
Length of cab 2200mm
Klimaanlage und Kälteleistung 4600W
Eine Klimaanlage Heizleistung 5000W(Kühlerschutzmittel über 85℃)
10.Rohr und tools (optional)
Benzin-Rohr und No-Dig Rohr ist verfügbar. Wasser Flügel backreamer, Expander backreamer, kompakte geriffelten Backreamer oder andere spezielle Werkzeuge steht zur Verfügung. Der Durchmesser beträgt 300 mm bis 1000 mm, die maximale Entfernung, die bewältigen kann, ist 1000m. Der Kunde sollte bestimmen, welche Werkzeuge, Gelenk, schwenkbare verwendet werden abhängig von der Geologie am Einsatzort.
Parameter |
Spezifikation eins |
Spezifikation zwei |
Durchmesser des Rohres |
ϕ127mm |
Φ140mm |
Länge des Rohrs |
9600mm |
9600mm |
Gemeinsame Leitung |
API-NC50 |
API 5 1/2FH |
Hinweis. Die Kraft und Drehmoment auf das Rohr nicht auf max gleichzeitig erreichen. Bitte an die Regeln des Rohres. Dies kann den Thread Zement des Rohres vermeiden..
3.Wichtigsten technischen Parameter
Artikel |
Einheit |
Parameter |
thrust-pull force |
kN |
3000 |
Schlitten Maximale Betriebsgeschwindigkeit |
m/min |
40 |
Anzahl des Schlitten-Schub-Zug-Motors |
PCS |
8 |
Max. Drehmoment des Schlittens |
N·m |
100000 |
Drehzahl der Schlittenspindel |
r/min |
90 |
Schlitten Drehmotor Menge |
PCS |
3 |
Maximaler Durchmesser der Senkbohrung |
mm |
Φ1500 |
Maximale Bohrlänge |
m |
1300 |
Bohrer-Rohrlänge |
m |
9.6 |
Rohrdurchmesser des Bohrers |
mm |
Φ127/Φ140 |
lugs angle |
° |
11~17 |
Motor-Typ |
|
Cummins L9 CS4 360C |
rated power |
kW/(r/min) |
264/2100(*2) |
Maximales Drehmoment |
N·m/(r/min) |
1600/1200 |
Spurweite |
mm |
2350 |
Gleis Gleis |
mm |
3150 |
Spurbreite |
mm |
500 |
Minimale Bodenfreiheit |
mm |
300 |
Maximale Gehgeschwindigkeit |
Km/h |
≥2.4 |
Maximale Steigung |
% |
≥30 |
LKW-montierter Kran |
Maximale Tragfähigkeit |
t |
3.2 |
Außenmaße (Status des Transports) |
Länge |
m |
≤17.5 |
Breite |
m |
≤3.23 |
Höhe |
m |
≤3.25 |
Arbeitsgewicht |
t |
40 |
4.Kernteile-Tochtergesellschaft
Kernteile |
Passender Hersteller |
Motor |
Cummins |
Kreiselpumpe |
Sauer |
Push-Pumpe |
Sauer |
Drehmotor |
Poclian |
Drücken Sie Motor |
XCMG |
Push-Druckminderer |
XCMG |
Controller |
Rexroth |
Hauptventil |
AMCA |
Griff |
P+G |
Zu Fuß Reduzierstück |
XCMG |
Hydraulikzylinder |
XCMG |
LKW-Kran |
XCMG |
Hydraulische Schläuche |
XCMG |
5.Das Aussehen der Maschine und der Transport
The machine transportation Dimension 17500×3230×3250mm
Versand Gewicht(frei von Bohrer und Bohrwerkzeuge) 40t
6.Accompanied Attached Documents/strong>
HDD-Maschine starten, wenn sie von der Packliste begleitet wird, umfassen Sie die folgenden technischen Unterlagen:
Produktzertifikat
Produkt-Handbuch
Motorspezifikation
Klimatisierung der Bau Fahrzeug allgemeines Handbuch
Bedienungs- und Wartungshandbuch der Lader Kran
Schlamm-Pumpe-Bedienungsanleitung
Verpackung-Liste (einschließlich der Verschleiß- und Ersatzteillager, Fahrzeugbestand Werkzeuge,
Versand-Liste mit Gegenständen)