BW-800 mud pump for drilling rigs is a kind of multi-purpose horizontal triplex reciprocating single-acting piston pump, with four gear shifting and four traffic.
It can not only meet the requirements of a variety of new drilling techniques, but also meet the requirements of hydraulic percussion drilling, internal screw drilling, turbine drilling, common core drilling with a hole depth of 2000m or more, and non-excavation drilling rigs about 70 Тонн.
| Модель | BW-800 |
| Тип | Hydraulic Mud Pump |
| Инсульта | 135 |
| Cylinder Diameter | 110 |
| течь | 260-800 Л/мин |
| Давление | 3.5-10 MPA |
The flushing liquor used by the pump should not contain the chemical impurity, which may corrode metal and rubber parts, meanwhile, the temperature can not exceed 50℃. If the fluid is drilling mud, then it is recommended to follow below requirement:
1) Specific gravity: between 1.03~1.12,
2) Velocity: 18~25S
3) Allowable sand: Макс. 4% in content, Макс. diameter 3mm
4) PH Value: 7~8
5) No massive mud clods, grasses, tree leaves inside the fluid
| Тип | Horizontal Triplex Reciprocating Single Acting Piston Mud Pump |
| Инсульта (мм) | 135 |
| Cyclinder Diameter (мм) | 110 |
| течь ( Л/мин) | 800 550 370 260 |
| Давление (MPA) | 3.5 5 7.5 10 |
| Input Speed (r/min) | 503 |
| Input Power (КВТ) | 54 |
| Габаритные размеры (мм) | 1350*962*1025 |
| Вес (кг) | 950 |
| Hydraulic Motor Model | 2-350 |
| Hydraulic Motor Pressure (MPA) | 20 |
| Maximum Motor Flow (Л/мин) | 195 |
