Mud pump drilling bw250 is a kind of horizontal, triplex, single acting reciprocation piston pump.
It can be applied to the geological exploration and engineering exploration of railways, water conservancy, metallurgy, Bau, Geologie, foundation plugging, Injektion, etc.. The hole depth is within 1500m.
| Modell | BW-250 |
| Typ | Hydraulic Mud Pump |
| Takt | 70 |
| Cylinder Diameter | 75 |
| Fluss | 69-250 L/min |
| Druck | 2.5-9 MPA |
For the above mentioned pumping fluid, it can’t contain any chemical impurities which are corrosive to metals and rubbers, meanwhile, the temperature should be no higher than 50℃. If the fluid is drilling mud, then it is recommended to follow below requirement:
1) Specific gravity: between 1.03~1.12,
2) Viskosität: 18~25S
3) Sand content: Max. 4% in content, Max. diameter 3mm
4) PH Value: 7~8
5) No massive mud clods, grasses, tree leaves inside the fluid
| Typ | Horizontal Triplex Reciprocating Single Acting Piston Mud Pump |
| Takt (mm) | 70 |
| Cyclinder Diameter (mm) | 75 |
| Fluss ( L/min) | 250 158 100 69 |
| Druck (MPA) | 2.5 4 6 9 |
| Input Speed (u/min) | 727 |
| Input Power (KW) | 14 |
| Abmessungen (mm) | 815*804*861 |
| Gewicht (kg) | 290 |
| Hydraulic Motor Model | 2K604-0041 |
| Hydraulic Motor Pressure (MPA) | 17 |
| Maximum Motor Flow (L/min) | 64 |
