Mud pump drilling bw250 is a kind of horizontal, triplex, single acting reciprocation piston pump.
It can be applied to the geological exploration and engineering exploration of railways, water conservancy, metallurgy, строительство, Геологии, foundation plugging, Затирки, и т.д.. The hole depth is within 1500m.
| Модель | BW-250 |
| Тип | Hydraulic Mud Pump |
| Инсульта | 70 |
| Cylinder Diameter | 75 |
| течь | 69-250 Л/мин |
| Давление | 2.5-9 MPA |
For the above mentioned pumping fluid, it can’t contain any chemical impurities which are corrosive to metals and rubbers, meanwhile, the temperature should be no higher than 50℃. If the fluid is drilling mud, then it is recommended to follow below requirement:
1) Specific gravity: between 1.03~1.12,
2) Вязкость: 18~25S
3) Sand content: Макс. 4% in content, Макс. diameter 3mm
4) PH Value: 7~8
5) No massive mud clods, grasses, tree leaves inside the fluid
| Тип | Horizontal Triplex Reciprocating Single Acting Piston Mud Pump |
| Инсульта (мм) | 70 |
| Cyclinder Diameter (мм) | 75 |
| течь ( Л/мин) | 250 158 100 69 |
| Давление (MPA) | 2.5 4 6 9 |
| Input Speed (r/min) | 727 |
| Input Power (КВТ) | 14 |
| Габаритные размеры (мм) | 815*804*861 |
| Вес (кг) | 290 |
| Hydraulic Motor Model | 2K604-0041 |
| Hydraulic Motor Pressure (MPA) | 17 |
| Maximum Motor Flow (Л/мин) | 64 |
