- Drilling rods (2)
- Excavator (1)
- HDD accessories and tools (33)
- Pipe Jacking Machine (5)
- Horizontal Directional Drill (35)
Product Model: XZ1350 Horizontal Directional Drill
XZ1350 HDD structure adopts crawl chassis, it uses the power saving closed hydraulic system, equipped with electro-hydraulic proportion control, efficient advanced load sensitivity and patent technical. The main technical specifications reach the advanced level in international. The main components of hydraulic system, transmission, electric system and gearbox are made of world first-class brand products, good performance, good reliability.
1. Features Introduction of XZ1350 HDD
1.1 Numerical meter display the working torque, push or pull force and so on parametric in working conditions. Electronic sensor has rapid reaction and can show overload immediately. It also endures accuracy and delay of the traditional hydraulic meter’s indication. It solve the matter to depend the operator to calculate the torque and force by the equipment’s switch directive.
1.2 Elastic equilibrium release technology is to avoid device damaging when pulling pipeline back, which increase the reliability.
1.3 The HDD adopt the patent of rotation tooth. It is easy to achieve in clipping the pipe. It is reliable in clamping.
1.4 The HDD’s rotation adopt closed hydraulic system and it’s push or pull adopt load sensitivity technology. The main part of hydraulic and electric and transmission are made of world first-class brand products, good performance, good reliability.
1.5 Cab’s 45°rotation enhances comfortable operation.
2. Technology Introduction
HDD adopts crawl chassis. It can fitted to more kind of ground and has high reliability. The travel gearbox producing by world first-class brand make it possible of good performance, good reliability.
|Distance between wheel’s axis||3165 mm|
|Width between two tracks outside||2475 mm|
|Width of track||450 mm|
|Length between two tracks||2025 mm|
|Number of track rolle||7×2|
|Gearbox of travelling||88ml/r /47ml/r|
|Drive force||72kN ×2|
|Max travelling speed||2.2km/h|
2.2 The powerful engine has the turbine torque increment characteristic. It meets for the
request of Chian Stage II and EU Stage A.
|Model of engine||QSL8.9-C360|
|Max torque of engine||1500N·m /(1500r/min)|
|Rated speed of engine||2100 r/min|
|Emission of engine||China Stage III and EU Stage A|
|Capacity of fuel||425L|
2.3 Hydraulic System
Rotation adopts the closed hydraulic system. The movements of push or pull adopt load sensitivity technology. World first-class brand’s components can provide good performance and good reliability.
|Push or pull system|
|Capacity of Hydraulic oil tank||490L|
|Hydraulic oil||Caltex HD46(-15ºC~40ºC)
2.4 Electronic system
The HDD adopts intelligent and CAN bus control technology. The meter shows clearly and easy to see.
The HDD shows the actual torque and push or pull force immediacy in the large and high showing size monitor automatic.
PLC control technology can detect the engine speed, the temperature of cooling water, the pressure of lubrication, the temperature of hydraulic oil, the pressure or stoppage of filter element, the position of carriage etc. It can also alarm to the operator in wrong condition.
The HDD travel safety at stepless speed regulation and controlled by wire cable.
The multi-speed control of rotation and push or pull make HDD be suitable to the complex geology.
|Voltage of electronic||DC24V|
|Handle of rotation||P+G|
|Switch of sensor||Honeywell|
|Switch of route||Honeywell|
|Sensor of temperature||Danfoss|
|Sensor of pressure||Danfoss|
The entry angel is changed by adopting the link weldment and cylinder. It has the advantage of simple and safety. Entry angle adjust by drill frame 10°~17°
Push or pull is executed by rack and pinion. The HDD also use the floating axis to protect
the pipe’s thread. The rapid speed is carried out by the variable motor. The speed of carriage
and the force of push or pull can be executed steplessly.
|Max thrust-pull speed||27m/min|
|Maximum rotating torque||50500 N·m|
|Distance of carriage moving||7500mm|
|Gearbox of rotation||2|
|Gearbox of push or pull||4|
The HDD is fitted with the clamp so that the pipe can be gripped tightly. The fixed wise and rotation wise can separate or integrate. It has a good sight of clamp and is good to change the tooth.
|Torque of clamp||110000N·m|
|Distance of clamp separation||300mm|
2.8 Loader Crane
The HDD is assembled 3.2t loader crane. It was controlled by hand and It operate vey convenience.
|Weight of lift||3.2t|
|Max distance of lift||8.1m|
|Max torque of crane||6.4t·m|
Cab with anti-noise function and air condition can rotate by cylinder. It is also fitted with light, windscreen wiper, sunshade curtain, damping seat and suit for operation. All these increase comfortable while operating the HDD.
|Width of cab||1000mm|
|Length of cab||1800mm|
|Air conditioning and refrigeration capacity||4600W|
|Air conditioning heating capacity||5000W(Engine coolant above 85ºC)|
2.10 Pipe and tools (optional)
Petrol pipe and No-dig pipe is available. water wing backreamer, expander backreamer, compact fluted backreamer or the others special tools is available. The diameter isΦ300mm to Φ1000 mm, the max distance which can deal with is 1000m. The customer should determine what kind of tools, joint, swivel will be used depend on the geology at the operation site.
|Parameter||Specification one||Specification two|
|Diameter of pipe||φ114mm||φ127mm|
|Length of pipe||6000mm||6000mm|
|Joint of pipe||API NC46||API NC50|
Note. The force and torque on the pipe can’t reach to max at the same time. Please to obey the rules of the pipe. This can avoid the thread cement of the pipe.
3.Main technical parameters
|Power rating||264 kW/(2100 r/min)|
|Max pull/thrust force||1795 kN|
|Max pull/thrust speed||27m/min|
|Rotation||Maximum torque||50500 N·m|
|Max spindle speed||89 r/min|
|Max inclination angle||17°|
|Loader Crane||Lifting weight||3.2 t|
|Loading capacity||6.4 t•m|
|Travel driving||Style||Steel crawler self-propelled|
|Traveling speed||2.2 km/h|
4. Core parts subsidiary
|Core parts||Matching manufacturer|
5. The Machine Appearance and Transportation
|The machine transportation Dimension||11680×2760×3540mm|
|Shiping weight(free of Drill and Drilling Tools)||25t|
6. Accompanied Attached Documents
HDD machine start when accompanied by the packing list, include the following technical documents:
Air Conditioning of Construction Vehicle General Manual
Operation and Maintenance Manual of Loader Crane
Mud Pump Instruction Manual
Packing List (including wearing parts and spare parts inventory, vehicle tools inventory, shipping list with items)